24 May 2013
As mentioned before, fuses are used to set a couple of things that might need to be set before the actual software starts to run. As a beginner you should not tinker with most of those settings, because it is possible to lock yourself out of in-system programming.
Installing the Software
As mentioned, there are many options when it comes to software. One standard program, which is available for many operating systems is avrdude. Unfortunately, it is a command line tool, which makes it less than ideal for beginners. But there are GUI frontends available. I decided to use AVRDUDESS for this tutorial. And it is quite easy to use.
23 May 2013
What Hardware do I need?
Obviously you need the controller. This can be any Atmel ATtiny or ATMega. You need a circuit board to put the controller in (the "target board") and you need an ISP programmer. Since ISP uses a serial format, the programmer can be rather compact.
20 May 2013
Many of my projects use AVR controllers from Atmel. And they need to be "programmed". This means that the software needs to get written into their internal program memory.
For beginners, this can be a major stumbling block in any project. And I do get lots of questions in connection with programming. So I decided to write this tutorial. But my intention is not just to give a list of buttons you have to press. Instead I want you to understand what you are doing.
This tutorial assumes you have a Windows PC and use an USBasp programmer. They are available from your favourite auction website (very cheap, ready made, from China). Alternatively you can support their creator Thomas Fischl and buy his kit.
2 May 2013
- Doesn't take long
- Can be done by children (with a little help)
One of my sons recently started to nag me. He wanted to solder something. Initially I had no idea what he could solder and I thought he was simply bored. But he kept going and I knew I had to find something. Finally I remembered that it would be "Blue Night" soon and that I wanted to take my kids there. So we could build some coloured light object to be worn at the event.
I looked through my unused hoard of components and found the bag with one hundred rainbow LEDs (i.e. slow colour changing LEDs). I had ordered them from China for little money - for no good reason really...
And so was born the idea to build a little pendant of 3x3 LEDs.