17 December 2012

How to Build a Simple LED Cube 4x4x4 - Part 4

Software
The software is derived from my earlier LED cube, the charlieplexed version. Of course the "hardware layer" had to be changed, because physical control of the LEDs is different. But the rest is very similar.

3 December 2012

How to Build a Simple LED Cube 4x4x4 - Part 3

Connecting the Electronics
There isn't much, really. First, solder the microcontroller's socket to the perfboard, then the socket of the driver. I didn't use a socket for the driver initially, which I regretted later...

Here is a schematic.